POWER TO THE PEOPLE!

This guide takes you through all the steps you need to get the best use, and best smoke, out of your Nectar Collector E-Tip

Setup

Connect and charge the Battery Base using the USBC cable

This unit comes with a charge however we suggest charging the unit before you use it for the best experience.
The first time you heat the unit there may be a little smoke come from the heated tip element, this is normal.

Fill your Nectar Collector® with water halfway up the diffuser.
Connect your Nectar Collector® to the Battery Base.
Connect the Sip, Dip or Rip Tip to the Battery Base.

Operation

Press the button 5 times to turn the unit on and 5 times to turn it off.
Change temperature setting by pressing the button 3 times.
LOW POWER
MEDIUM POWER
HIGH POWER
Press the button 2 times for continuous heating.
When connected, the Battery Base will flash a single color, indicating remaining battery level: Green, Yellow, or Red.